Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping

 

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

 

Product Details

• Shipping Weight: 31.4 pounds (View shipping rates and policies)
• Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
• Shipping Advisory: This item must be shipped separately from other items in your order. Additional shipping charges will not apply.
• ASIN: B0002ZO7A2
• Item model number: MITER5000
  

By : Incra
List Price : $409.14
Price : $266.97
You Save : $142.17 (35%)

Product Description

Amazon.com Product Description
The Miter 5000 Table Saw Miter Gauge blends the incremental angle control functions of the Miter 3000SE with a fairly unique 3-panel Sled for the ultimate miter cutting workstation for the table saw. The sled with two aluminum T-tracks and clamping fixture secures the function piece as one particular solid unit for precision cross-cutting at any angle. The tracks are embedded in the MDF panel best to secure an included function piece hold-down clamp and to produce absolute rigid support for the 36- to 64-inch telescoping IncraLOCK Cuto-off Fence.
The right-hand portion of the sled, once cut, secures to the right miter slot of your table saw by signifies of a miter slider and functions as a zero clearance cut-off table that is perfectly aligned with the principal sled. Since this system contains precision angle adjustment, stop positioner and clamping sled for superior work piece manage, all possibility for cutting error has been eliminated and each cut is predictable and precise. Also featured with just about every Miter 5000 is a straightforward and extremely beneficial hold down clamp which locks your function piece onto the sled for maximum accuracy and the cleanest cuts possible.
Ten expansion disks adjust each sides of the bar for zero side play, anti-friction travel on all table saws with common 3/4-by-3/8-inch or close to-common miter gauge channels, which includes Delta, Craftsman, and imports. This signifies that all of Incra's amazing precision will essentially show up in your operate given that the bar won't wiggle around in the miter slot. Also included are Particular Edition Miter Fence telescopes from 18- to a complete 31-foot length. The dual flip store quit and Incra's patented automatic positioning control also come regular with this model. AngleLOCK Indexing Precision angle indexing teeth are laser cut in solid steel to lock in 364 positive angle stops in 1/2-degree increments more than a complete 180-degree range. Interlocking grooves in the fence and stop make sure even the sharp edge of mitered function will not push behind the cease. The fence locking bracket creates a monolithic rigid platform and fence when tightened down. Immediately set utilizing the included regular hex tool, this feature takes an already powerful platform into the rigidity level expected in any professional machining atmosphere.
Capitalizing on a superb notion, the people a INCRA® have combined their extremely thriving Miter3000® with the exclusive AngleLOCK® Indexing System with a sled system for the table saw. The sled with T-track and clamping fixture secures the workpiece as one particular solid unit for precision cross-cutting at any angle. The perfect-hand portion of the sled, once cut, secures to the correct miter slot of your table saw by implies of a miter slider and functions as a zero clearance cut-off table that is perfectly aligned with the most important sled. Given that this method includes precision angle adjustment, stop positioner and clamping sled for superior workpiece manage, all possibility for cutting error has been eliminated and each and every cut is predictable and precise. Finally, a fantastic cross-cutting system for your table saw! Order the replacement Panel for maintaining zero clearance for various blades and compound angle cutting. Please see above for Miter3000® specifications.
See all Item Description

Technical Details

• Table saw that blends incremental angle control and a special 3-panel sled
• Precision angle indexing teeth are laser cut in solid steel
• 364 lock solid angle stops in 1/2-degree increments
• Ten expansion disks adjust both sides of the bar for zero side play
• Hold down clamp locks your work piece onto the sled

Consumer Evaluations

The Incra Miter 5000 really should make any woodworking perfectionist particularly pleased. I'm absolutely pleased, and here's why.
I've been tuning up my woodworking expertise by producing cabinets for my store, but I couldn't get regularly square crosscuts with my tablesaw's stock miter gauge. The result was gaps in joints, and worse, doors and drawers that did not fit or slide smoothly.
Immediately after contemplating a lot of DIY sled plans, I decided to spring for the Miter 5000. Not only does it deliver repeatable angle cuts, but the flip-up "store-stop" makes crosscuts dead-on correct and repeatable in length, also. This is because the Miter 5000 is literally 'digital' -- the cease adjusts in precise 1/32" steps.
I did have a minor situation. The miter bar T-clip that keeps the bar from popping up when the sled is pulled far back was binding in the slot. I located the sled table was warped about 1/16" and when pressed down, it lifted the miter bar, causing the T-clip to rub. The Incra people don't do e-mail, but they deliver fantastic client service by decent ol' telephone. I had no difficulty receiving by way of, and when I explained the issue, they sent a replacement sled panel suitable away. No hassles. That one was perfectly flat and now the sled works terrific.
My initially project built with the sled was a caddy to retailer it. You might possibly want a single also, because the whole assembly is major -- 36" x 31" -- awkward to store, and you do not want to bang it around. The caddy is like a sawhorse on wheels, with solid sides inclined at 15 deg (hey, that's basically 15.000 degrees, thanks Incra!). Rout grooves in the sides for the miter bars and put cleats close to the bottom for the sleds to rest on. It rolls under the saw's correct extension table. I left the inside of the caddy open to give me additional storage. It went together like no cabinet I've ever built just before despite all the angle perform, thanks to the Incra.
Bottom line: A superb table saw accessory that increases crosscut/miter angle and length accuracy, and enhances safety also. Fantastic assistance from the corporation. Do you like making precision function? Then treat oneself to this!

Are you new to woodworking?
Nicely, so was I three years ago when I set out to build cabinets, built-in bookcases, custom stairways, fireplace mantels, and workdesks for our dwelling. I started out with nothing additional than a sliding miter saw, a circular saw, a jig saw, some drills and sanders. Certain enough I actually built countless of the items I listed above. A lot of time and even way more glue and screws went into that portion of my life.
WHAT I Really LEARNED WAS THE Importance OF OWNING A Superb TABLE SAW
So I bit the bullet and purchase a Powermatic 66 5 HP Cabinet Saw after what I read on Amazon reviews, and so on.
Nicely,when you have a outstanding table saw, it's like your dreams came accurate and you wondered how you did Something with just some hand tools. BUT, THIS MITER SLED makes the table saw even far better than it already it Simply because YOU CAN GET SUCH ACCURACY AND SQUARE CUTS! Yep, not getting a square cuts can mess up just about something your operating on. Add to that REPEATABLE cuts for your cabinet doors, bookshelves, raised panels, Anything
I hardly ever have to use my tape measure becaue of the rather simple and sophisticated scales Incra puts appropriate on their initially class miter gauge fences.
NOW HERE'S THE DEAL - YOU Have to Spend HOURS, YEP A Few HOURS! JUST When, TO SET THIS UP Correctly. IF YOU DO THIS, THE Perfect SQUARE CUTS, THE Perfect LENGTH CUTS(EVERYTIME!) AND Wonderful MITER ANGLES WILL Totally STUN YOU. AND It is Accomplished WITH EASE AND SIMPLICITY.
I just can't say enough about the superb instructions and the quality of the elements. Mine was dead on square, the fences were made from high grade box aluminum extrusions that do not flex or bend for total accuracy and a "solid really feel" to boot.
I know you can build your own for quite possibly much less, but there is NO WAY a wood jig can compete with this point, I just figured that I do not require to reinvent the wheel on something right here os I just got the very best one I coule obtain.
Once more, if you're not applying this kind of tool with your tablesaw you just do not know what you are missing. Do not think also long about this one - go get one particular on sale somewhere, you are going to be astonished like I was.
Hope that helps!

List Price : $409.14

Price : $266.97
You Save : $142.17 (35%)